Metal Roofing in North Texas

Standing seam metal porch roof beside a reroof in progress, with the crew installing roofing on the main house

Built for Texas Hail, Texas Heat, and Texas Wind

A metal roof costs more up front than asphalt. Homeowners who choose it anyway are usually doing the math over thirty years instead of ten.

Texas Roofing Project installs metal roofing throughout Garland, Plano, Richardson, Rowlett, Sachse, Wylie, and the surrounding North Texas communities. We will tell you straight whether metal makes sense for your house or whether your money is better spent elsewhere.

Why North Texas Homeowners Choose Metal

Our climate is hard on roofs in three specific ways, and metal answers all three.

Hail. North Texas sits in one of the country’s most active hail corridors. Metal does not crack or lose granules the way asphalt does, and many metal systems carry a Class 4 impact rating.

Heat. Summer surface temperatures on a dark asphalt roof get brutal. Metal reflects solar radiation instead of absorbing it, which reduces the load on your air conditioning.

Wind. Properly installed metal panels handle high wind better than most shingle systems, because the fastening method holds the whole panel rather than individual tabs.

Metal Roofing Systems We Install

Not all metal roofs are the same product, and the differences matter for both cost and appearance.

Standing Seam

Vertical panels with concealed fasteners and raised seams. This is the premium residential option because there are no exposed screws to back out or wear over time.

Exposed Fastener Panels

Panels screwed directly through the face, often called R-panel or corrugated. Lower cost and faster to install, with a tradeoff in long-term fastener maintenance.

Metal Shingles and Stone-Coated Steel

Metal formed and finished to look like shingle, shake, or tile. A good fit for homeowners who want metal performance without the commercial look, and for neighborhoods with appearance standards.

Commercial and Low-Slope Metal

Standing seam and architectural systems for commercial buildings. More detail is on our commercial roofing page.

Our Metal Roof Installation Process

Inspection and Structural Check

We get on the roof, assess the deck, and confirm the structure suits the system you want. Metal is lighter than tile and comparable to asphalt, so structural problems are rare, but we verify rather than assume.

Material and Profile Selection

You see real samples, real colors, and real numbers. We explain the difference between gauges, coatings, and panel profiles so the decision is yours and not ours.

Professional Installation

We install underlayment, flashing, and fastening to the manufacturer's specifications. Metal is unforgiving of shortcuts at valleys, penetrations, and edges, which is where most failures start.

Cleanup and Final Walkthrough

We clear the site, run magnets for stray fasteners, and walk the finished roof with you before we call it done.

What Metal Roofing Costs in North Texas

Expect metal to run meaningfully higher than asphalt on day one. That is the honest answer, and anyone who tells you otherwise is quoting something you do not want.

Cost depends on the system you pick, the gauge and coating, roof complexity, and whether we tear off the existing roof or install over it. Standing seam sits at the top of the range and exposed fastener at the bottom.

The trade-off comes down to replacement cycles, cooling costs, and insurance. This brings up the part most homeowners don’t know about.

Metal, Hail, and Your Insurance Premium

Texas insurers commonly offer a premium discount for roofs with a Class 4 impact rating, and many metal systems qualify. The discount varies by carrier and is not automatic. You generally need documentation of the product installed, which we provide.

We wrote up how this works for shingles in Class 4 shingles and your Texas insurance discount, and the same principle applies to rated metal systems. Ask your agent what your specific carrier offers before you choose a product.

One honest caveat. Metal resists hail damage far better than asphalt, but severe hail can still cosmetically dent softer metals. If appearance after a hailstorm matters to you, ask us about gauge and profile, because both affect how a panel shows a dent.

Answering the Two Questions Everyone Asks

Is a metal roof loud in the rain? Not on a house. That reputation comes from barns and sheds where metal is fastened to open purlins with nothing underneath; over a solid deck with underlayment, it is comparable to asphalt.

Does metal attract lightning? No. Metal does not increase the chance of a strike, and because it is non-combustible, it generally handles one better than a shingle roof would.

When Metal Is the Wrong Call

We install a lot of metal. We also talk homeowners out of it, and it is worth knowing when.

You are moving in a few years. The economics of metal play out over decades. If you are selling soon, you are paying for a lifespan someone else gets.

Your budget is already stretched. A quality architectural shingle roof installed correctly beats a cheap metal roof installed poorly, every time. Spend on the install before you spend on the material.

Your roof is complex. Valleys, dormers, and penetrations drive metal labor up fast because every transition is a hand-detailed flashing job.

An HOA restricts it. Some North Texas neighborhoods limit panel profiles or finishes. Check before you fall in love with a sample.

You cannot tolerate cosmetic denting. Severe hail can dent softer metals without affecting performance. If that would bother you, we will say so up front.

Complete Roofing Solutions for Your Home

Residential Roof Replacement

Full replacement in asphalt, architectural shingle, metal, or synthetic. See our roof replacement page.

Free Roof Inspection

A documented assessment before you commit to anything. Start with our free roof inspection.

Residential Roof Repairs

Leaks, flashing, and wear on existing roofs, including metal. See roof repairs.

Storm Damage Restoration

Hail and wind restoration with claim support. See storm damage restoration.

Insurance Claims Help

Guidance through the claim process from inspection to final invoice. See roof insurance claims.

Frequently Asked Questions About Metal Roofing in North Texas

Commonly 40 to 70 years, depending on the system, coating, and installation quality. The coating matters more than most homeowners expect, because that is what fails first in our sun.

Sometimes, depending on the condition of the deck and what local code allows. We check the deck before recommending it, because covering a bad deck just hides a problem you will pay for later.

It reduces heat absorbed into the attic, which takes load off your cooling system. Savings depend on your attic insulation and ventilation, so we look at the whole assembly rather than promising a number.

Often, if the system carries a Class 4 impact rating and your carrier offers an impact-resistant discount. Confirm with your agent, because terms vary by company.

Most residential metal installations run longer than an asphalt replacement because the work is more precise. We give you a schedule up front and tell you if weather moves it.

Serving North Texas Communities

Texas Roofing Project installs metal roofing throughout Garland, Plano, Richardson, Rowlett, Sachse, Wylie, Mesquite, Rockwall, and everywhere in between.

Get a Straight Answer on Metal

Metal is the right call for some North Texas homes and the wrong call for others. We would rather tell you that before you spend the money than after.

Call 214-600-7661 or request a free inspection, and we will give you real numbers on both metal and asphalt so you can compare them side by side.